2 x Antenna/Aerial with Spring 1:32 Scale by Artisan 32 21239
- Antennas with spring function, nickel
- 0.3 to 0.4 mm thickness
- Cut before a piece of pipe off (1 cm to 1.5 cm) with a sharp knife, as shown in the photo. (Role / cutting through the nozzle so, then the hole remains open) Then drill a hole 1 mm in the roof of the cabin style.
- If you want to place the antenna bracket on top of the roof, glue the aluminum pipe so, after which your antenna into the hole down with a little glue on it.
- Would you like the antenna support on the side of the roof of the cabin-style places, you bend the cut piece of aluminum pipe even with tweezers or between the fingers, and glue them into the drilled hole 1 mm, and then you let the antenna inside bags with a little glue on it
This set contains only two antennas 1:32
- Suitable 14 years+
Box Corrugated White/Clear Shed Roof/Cladding Sheet Plastic 1:32 Scale by Minia-CN MCD-051-A/B
Corrugated White/Clear Shed Iron/Tin/Metal Roof Sheet Corrugated A3 Size Plastic 1:32 Scale by Minia-CN MCD-050 A/B
Corrugated White/Clear Iron/Tin/Metal Shed Roof Sheet Corrugated A3 Size Plastic 1:32 Scale by Minia-CN MCD-056 A/B